Kyalami | Quali Setup + Race Setup for LFM
Ferrari 296 GT3
Kyalami
Kyalami | Quali Setup + Race Setup for LFM
Qualifying Setup + Data:
- Aggressive setup optimized for qualifying pace (See setup adjustments below if needed).
Race Setup + Data:
- Fuel optimized for a 25 minute stint.
- This setup can also be used comfortably in 60 minute stints, however be careful of balance changes as fuel load decreases.
Driving Techniques:
- Allow 2 laps for the tires to reach the optimal operating range.
- During races avoid "brosteering" the tyres in the first few laps or you may have significant pace drop later on.
Setup Adjustments:
- Race: Run TC1 at 5 or 6 depending on your driving style. For Qualifying, run TC1 on 5 for the best quickest raw pace, or at 6 or 7 if you would like a much safer car.
- If you experience excessive rotation or oversteer while braking, increase the brake bias.
- In cases of oversteer:
- Raise the front ride height by one or two clicks.
- Modify the front bump stop range (decrease) or front bump stop rate (increase).
- Modify the rear bump stop range (increase) or rear bump stop rate (decrease).
- Adjust the toe settings to be more positive on both the front and rear (note that this can extend tire life but may reduce cornering rotation).
- If the setup has excessive understeer, apply the opposite adjustments.
- When making setup modifications, avoid changing multiple settings at once, and apply minor adjustments.
For qustions or coaching, please reach out via DM on Discord: jackalexander_