Watkins Glen | Quali Setup + Race Setup for LFM
BMW M4 GT3
Watkins Glen
Watkins Glen | Quali Setup + Race Setup for LFM
Qualifying Setup + Data:
- Aggressive setup optimized for qualifying pace (See setup adjustments below if needed).
Race Setup + Data:
- Fuel optimized for a 25 minute stint.
- This setup can also be used comfortably in 60 minute stints, however be careful of balance changes as fuel load decreases.
Driving Techniques:
- Allow 2 laps for the tires to reach the optimal operating range.
- During races avoid "brosteering" the tyres in the first few laps or you may have significant pace drop later on.
Setup Adjustments:
- Race: Run TC1 at 2 or 3 depending on your driving style. For Qualifying, run TC1 on 2 or OFF depending on your preference.
- If you experience excessive rotation or oversteer while braking, increase the brake bias.
- In cases of oversteer:
- Raise the front ride height by one or two clicks.
- Modify the front bump stop range (decrease) or front bump stop rate (increase).
- Modify the rear toe (increase) and/or front toe (increase).
- If the setup has excessive understeer, apply the opposite adjustments.
- When making setup modifications, avoid changing multiple settings at once, and apply minor adjustments.
For qustions or coaching, please reach out via DM on Discord: jackalexander_