First and foremost, I want to clarify that this setup is made for my driving style. You might find it difficult to adapt to. That's why we'll offer some suggested adjustments to best suit your driving style.

VE: - 100% for Endurance
      - adjust according to the duration of your race (20/30 min race for example)

Fuel Ratio: 0,73

Onboard TC:   6 (you can put 5)
TC Power Cut: 5 
TC Slip Angle: 3 (you can put between 2 and 7)

HotLap/Qualifying lap adjustement:

- Brake Bias: increase the BB if you lose rear traction under braking zone => 48,3-51,7 or 48,5-51,5 or more if you need more
- Front Camber: decrease near -2,1 if you want more grip lateral but you'll lose responsiveness on the front axle or don't touch
- Front Toe-in: increase to -0,25 if you want more turning but it's a little bit more tricky (it depends on the feeling of player)
- Rear Toe: don't touch
- Front Antiroll Bar: increase 1 click if you want more stable OR decrease 1 click if you want more turning or don't touch
- Rear Antiroll Bar: don't touch
- Rear Ride Height: decrease 1 click if you want more stable OR increase 1 click if you want more turning or don't touch
- Rear Wing: increase 1 click if you want more stable but you'll lose so much speed on the straight line 
- Front Brake Ducts Blanking: it depends on the temperature
- Rear Brake Ducts Blanking: it depends on the temperature

Race adjustement (advice): Adjust based on race duration. For 15 minutes, you can keep the qualifying setup. For endurance with a 1h/1h10 stint, opt for a slower setting for pure performance but consistent over the duration of the stint.

- Brake Bias: increase the BB if you lose rear traction under braking zone => 48,5-51,5 / 48,8-51,2 or more if you need more
- Front Camber: increase to -1,8 if you want more stable but you'll need to be more patient
- Front Toe-in: increase to -0,12 if you want more stable but the front axle will become very lazy (it depends on the feeling of player) or don't touch 
- Rear Toe: don't touch
- Front Antiroll Bar: increase 1 click if you want more stable OR don't touch
- Rear Antiroll Bar: don't touch
- Rear Ride Height: decrease 1 click if you want more stable OR don't touch
- Rear Wing: increase 1 click if you want more stable but you'll lose so much speed on the straight line
- Front Brake Ducts: it depends on the temperature
- Rear Brake Ducts: it depends on the temperature

My best lap with this setup: 2:17.635 (on a mega lap, there is the possibility of doing 17.4 mid high, so you can improve so much my time)
Best lap with 100% full push 10 laps: 2:18.482 (on a mega lap, there is the possibility of doing 18.3 high, so you can improve so much my time)

Warning: The wear is very balanced on this Aston. Its main problem is the overheating of the front tires. Unfortunately, the current tire model doesn't really solve this issue. You can increase the tire pressure by a maximum of 2 clicks but the car then becomes very unpleasant to drive.

Good Luck and Have Fun.

YouTube: https://www.youtube.com/@kelicful3729
TikTok: https://www.tiktok.com/@kelicful
X: https://x.com/kelicful
Instagram: https://www.instagram.com/kevin_belic/

Hardwares:
Base: Simagic Alpha Evo 18nM
Roue/Wheel: Simagic Formula Xtreme FX
Pédalier/Pedals: Fanatec ClubSport Pedals V3